Nintendo Sound Clock: Alarmo First-Time Setup

Before you start

• A USB AC adapter is not included in the box but is required to use Alarmo.
  • The AC adapter should have a USB Type-A port and be capable of supplying at least 5V/1.5A/7.5W of power.
• Alarmo uses a motion sensor in most modes to detect movement when waking up. Make sure you have a stable place to put your clock. The location should allow for an unobstructed view of where the person using the clock sleeps.

Complete these steps

1. Place Alarmo on a flat surface so that the sensor zone includes where the user will be sleeping, such as next to the bed and near a wall socket for power.

   • Alarmo is equipped with a motion sensor that detects moving objects within a certain area. This area is called the “sensor zone”.

   • You will indicate where you’ve placed Alarmo in relation to the bed during setup.

2. Insert the included USB-C cable into the USB connector on the bottom of the clock.
3. Connect the USB-C cable to the wall outlet using a USB AC adapter (sold separately).
4. Follow the on-screen instructions and use the dial and Confirm Button on top of the clock to complete the first-time setup.
   • Language, region, time zone and date
   • Time
   • The clock's sensor zone
     • This will require you to have Alarmo placed on a flat surface. You will be given movement prompts to calibrate the motion sensor.
   • Set alarm scene and mode
   • Set alarm time

Additional information

After setup, you can reconfigure all the initial setup settings on Nintendo Sound Clock: Alarmo.

How to redo initial setup settings

1. Open the menu by pressing the dial (Confirm Button) once.
2. Turn the dial to find the Help screen.
3. Press the Confirm Button.
4. Turn the dial to find Redo Initial Setup.
5. Press the Confirm Button and follow the instructions to redo the initial setup process.